Area of Trapezoid

One pair of parallel sides.

Measurements

cm
cm
cm
Unit
Decimal places

Live figure

h = 5 cmb = 10 cma = 5 cm

Drag the sliders. The figure redraws to scale.

Results

Area37.5cm²
A = ½(a + b) × h
½ × (5 + 10) × 5 = 37.5
  • Perimeter26.18cm
    5 + 10 + 2 × 5.59 = 26.18
  • Leg5.59cm
    √(25 + 6.25) = 5.59
  • Base angle63.435°
    = 63.435°

Formulas

How each value is found

Area
A = ½(a + b) × h
Perimeter
P = a + b + 2 × leg
Leg
leg = √(h² + ((b − a) ÷ 2)²)
Base angle
tan⁻¹(h ÷ ((b − a) ÷ 2))

About the trapezoid

A trapezoid (trapezium) has two parallel sides of different lengths. Its area is the average of those two sides times the height. This tool uses a symmetric (isosceles) trapezoid.

Where you’ll use it

  • Roof and bridge sections
  • Handbags and lampshades
  • Channel and canal cross-sections

Area of a trapezoid: formula, steps and examples

Area of a trapezoid calculator

This free trapezoid area calculator finds the area of a trapezoid, along with its perimeter and angles, instantly. Enter top side, bottom side and height, choose your unit and the trapezoid calculator shows the area of a trapezoid with the formula, the substituted numbers and a live diagram drawn to scale, so you can see exactly how the answer was worked out.

Students use this online trapezoid area calculator to check homework and revision, while builders, designers and DIY fans use it to estimate materials without doing the sum by hand. It works in cm, metres, inches and feet, needs no sign-up, and is fast on phones, tablets and laptops.

What is a trapezoid?

A trapezoid (trapezium) has two parallel sides of different lengths. Its area is the average of those two sides times the height. This tool uses a symmetric (isosceles) trapezoid.

Understanding the shape comes first, because the area of a trapezoid depends on which measurements define it. For this shape you need top side, bottom side and height. Once those are known, every other measurement, including the perimeter, leg and base angle, can be calculated from them.

Area of a trapezoid formula

The area of a trapezoid formula is A = ½(a + b) × h. Remember this trapezoid area formula and you can solve any trapezoid area problem. Area measures the flat space inside the outline of the shape, so the answer is always written in square units (cm², m², in², ft²).

Related trapezoid formulas you will often need alongside it: perimeter P = a + b + 2 × leg; leg leg = √(h² + ((b − a) ÷ 2)²); base angle tan⁻¹(h ÷ ((b − a) ÷ 2)). All of them are calculated for you above and listed on the formula sheet.

How to find the area of a trapezoid, step by step

If you are wondering how to find the area of a trapezoid, or how to calculate the area of a trapezoid, follow four steps. 1. Measure top side, bottom side and height, using the same unit for every value. 2. Write the formula, A = ½(a + b) × h. 3. Substitute your measurements into the formula. 4. Calculate, and write the answer in square units (cm², m², in², ft²).

Worked example: with the default values in the calculator, area is found like this: ½ × (5 + 10) × 5 = 37.5. Change any slider or number above and the working rewrites itself, which makes it easy to practise with your own examples and check your answers.

Where the trapezoid is used in real life

Knowing the area of a trapezoid is useful far beyond the classroom. Typical uses include roof and bridge sections, handbags and lampshades and channel and canal cross-sections. Builders, designers, engineers, gardeners and craftspeople all rely on quick area calculations to estimate materials, cost and capacity before they start work.

Units and conversions for trapezoid area

To find the area of a trapezoid in cm, square feet or square meters, measure every side in that unit first. Because area is measured in square units (cm², m², in², ft²), converting units needs care. One square metre is 10,000 square centimetres, and one square foot is 144 square inches. Convert the lengths first, then calculate, or calculate first and convert the final area with the squared or cubed factor. The calculator handles the unit label for you so the answer always matches what you entered.

Tips for learning the trapezoid area formula

The quickest way to remember A = ½(a + b) × h is to understand where it comes from, not just memorise it. Sketch the trapezoid, label top side, bottom side and height, and ask what each measurement contributes to the area. Then practise with three or four different sets of numbers until the steps feel automatic.

Use the sliders above to see how the area responds when a single measurement changes. Doubling every length multiplies the area by four, because area depends on two lengths multiplied together. A length that is squared in the formula, such as a radius, quadruples the area when it is doubled on its own, while one that appears only once, such as a height, simply doubles it.

Related searches about the trapezoid

People who look for the area of a trapezoid often search for area of a trapezoid formula, trapezium area calculator, area of a trapezium, trapezoid perimeter and trapezoid formula too. This page answers all of them: the trapezoid calculator above gives the numbers, the formula section explains the method, and the worked example shows how the trapezoid area formula is used with real values. Use it for trapezoid math problems, revision questions and quick checks on site.

Explore more area calculators

After the trapezoid, try the rectangle, square, triangle and right triangle calculators, or open the full geometry formula sheet with all 20 shapes. Each page has the same live diagram and step-by-step working, so you can compare formulas and learn how area and perimeter relate across shapes.

Frequently asked questions

What is the formula for the area of a trapezoid?
The area of a trapezoid is A = ½(a + b) × h. Substitute your measurements and write the answer in square units (cm², m², in², ft²).
How do I calculate the area of a trapezoid?
Measure top side, bottom side and height in the same unit, put them into A = ½(a + b) × h, then calculate. This page does it automatically and shows every step.
What units is the area of a trapezoid measured in?
Area is measured in square units (cm², m², in², ft²). If your sides are in metres, the answer is in square metres (m²).
Can I find the trapezoid perimeter here too?
Yes. The calculator also gives the perimeter, leg and base angle with the formula and working for each.
What is the trapezoid formula?
The main trapezoid formula is A = ½(a + b) × h. Other trapezoid formulas: perimeter P = a + b + 2 × leg; leg leg = √(h² + ((b − a) ÷ 2)²).
How do I find the area of a trapezoid in cm, square feet or square meters?
Enter top side, bottom side and height in cm, m, inches or feet. The calculator gives the trapezoid area in cm², m², in² or ft².
Is this trapezoid area calculator free?
Yes, it is completely free, needs no account, and works on any device.