Length times width counts the unit squares that fit inside the rectangle.
Area of a rectangle.
Multiply the length by the width. Drag the sliders and watch the rectangle, its unit squares and the answer change together.
Measurements
w = A ÷ l
Live figure
Drag the sliders. The figure redraws to scale.
Results
- Perimeter26cm2 × (8 + 5) = 26
- Diagonal9.434cm√(64 + 25) = 9.434
The formula
How the area of a rectangle works
Four facts cover almost every rectangle question you will meet.
Know the area and one side? Divide to get the other.
The distance all the way round: two lengths plus two widths.
Area is always in square units, so remember the little ².
Area and perimeter
Pick a shape to open its calculator. Each one also reports the angles and diagonals that matter.
Rectangle
Four right angles, opposite sides equal.
Square
Four equal sides, four right angles.
Triangle
Three sides in, every angle out.
Right triangle
Two legs, one hypotenuse, Pythagoras.
Circle
Every point the same distance from the centre.
Ellipse
A stretched circle with two radii.
Parallelogram
Two pairs of parallel sides, leaning.
Trapezoid
One pair of parallel sides.
Rhombus
Four equal sides, a tilted square.
Quadrilateral
Any four sides, fixed by one diagonal.
Regular polygon
Pentagon, hexagon, octagon and beyond.
Sector
A slice of a circle, cut by an angle.
Volume and surface area
Boxes, cans, cones and balls: how much they hold and how much material covers them.
Cube
Six square faces, all edges equal.
Cuboid
A box: length, width and height.
Cylinder
Two circles joined by a curved wall.
Cone
A circle rising to a single point.
Sphere
A perfectly round ball.
Hemisphere
Half a sphere with a flat base.
Square pyramid
A square base with four triangular faces.
Triangular prism
An equilateral triangle, stretched.
How it works
Three steps to any answer
Pick a shape
Choose from 12 flat shapes and 8 solids. Each has its own calculator.
Drag the sliders
The figure redraws to scale as you move, with every side and angle labelled.
Read the working
Every result shows its formula and the numbers plugged in, ready to copy.
Area of a rectangle: formula, steps and examples
Area of rectangle calculator
This free area of rectangle calculator finds the area, perimeter and diagonal of any rectangle instantly. Enter the length and the width, pick centimetres, metres, inches or feet, and the answer appears straight away with a live diagram drawn to scale. Every result includes the formula and the numbers substituted into it, so you can see exactly how the area of a rectangle was worked out.
It is made for students checking homework, parents helping with maths, teachers preparing worksheets, and anyone measuring a room, garden, wall, screen or plot of land. There is nothing to install and no sign-up, and it runs smoothly on phones, tablets and computers.
What is a rectangle?
A rectangle is a four-sided flat shape in which every corner is a right angle of 90 degrees and opposite sides are equal and parallel. The longer side is usually called the length and the shorter side the width, although the formulas work whichever way round you label them. A square is a special rectangle where all four sides are equal.
The area of a rectangle is the amount of flat space inside its outline. You can picture it as the number of unit squares that fit inside the shape. If a rectangle is 8 cm long and 5 cm wide, it is covered by 5 rows of 8 one-centimetre squares, which is 40 square centimetres.
Area of a rectangle formula
The area of a rectangle formula is A = l × w, which means area equals length times width. Because you multiply two lengths together, the answer is always in square units such as cm², m², in² or ft². This is why area of rectangle questions end with a small squared symbol.
The formula can be rearranged. If you know the area and the length, the width is w = A ÷ l. If you know the area and the width, the length is l = A ÷ w. The calculator has a built-in reverse mode that finds a missing side for you.
How to find the area of a rectangle step by step
1. Measure the length and the width using the same unit. 2. Write the formula A = l × w. 3. Substitute your numbers. 4. Multiply, and add the square unit to the answer. For example, a rectangle 12 m long and 7 m wide has an area of 12 × 7 = 84 m².
Check your work by estimating first. A 12 by 7 rectangle should be a little more than 10 × 7 = 70, so 84 makes sense. If your answer is wildly different, look for a unit mix-up, such as multiplying metres by centimetres.
Perimeter and diagonal of a rectangle
The perimeter is the distance all the way around the outside. The perimeter of a rectangle formula is P = 2(l + w): add the length and width, then double it. For an 8 by 5 rectangle the perimeter is 2 × (8 + 5) = 26.
The diagonal runs from one corner to the opposite corner and splits the rectangle into two right triangles. Using the Pythagorean theorem, d = √(l² + w²). For the same 8 by 5 rectangle, the diagonal is √(64 + 25) ≈ 9.43. Perimeter is measured in ordinary units, while area uses square units, so never mix the two.
Where the area of a rectangle is used
Rectangle area is one of the most practical calculations in everyday life. It sizes flooring, carpet, tiles, laminate and paint for walls and ceilings. It measures garden beds, lawns, patios, decking and building plots, and it helps estimate turf, fencing and paving. Designers use it for posters, screens, paper sizes and page layouts, and builders use it for roofing, panels and plasterboard.
Getting the area right saves money. Order too little material and the job stalls; order too much and you pay for waste. A common tip is to add 5 to 10 percent to the calculated area for cuts and offcuts.
Units and conversions
Area units are squared, so conversions use the square of the length factor. One square metre equals 10,000 square centimetres, and one square foot equals 144 square inches. One square metre is about 10.76 square feet. Convert the lengths first and then multiply, or multiply first and convert the final area using the squared factor.
Explore more shapes
After the rectangle, try the square, triangle, circle, trapezoid and parallelogram calculators, or the solids such as the cuboid, cylinder, cone and sphere. The formula sheet collects every area, perimeter, volume and angle formula for all 20 shapes on one searchable page.
Frequently asked questions
- What is the area of a rectangle?
- The area of a rectangle is the flat space inside it, found by multiplying length times width. The answer is in square units.
- What is the area of rectangle formula?
- Area = length × width, written A = l × w. The area of a rectangle formula always gives square units such as cm² or m².
- How to find the area of a rectangle?
- Measure the length and width in the same unit, multiply them, and add the square unit. The rectangle area calculator does this and shows the working.
- How to calculate the area of a rectangle step by step?
- Write A = l × w, substitute the length and width, multiply, and write the answer with square units. Example: 12 m × 7 m = 84 m².
- What is the perimeter of a rectangle?
- The perimeter of a rectangle is the distance around it: P = 2(l + w). This is the rectangle perimeter formula.
- How do I find the diagonal of a rectangle?
- Use the Pythagorean theorem: d = √(l² + w²). For an 8 by 5 rectangle the diagonal is about 9.43.
- What is the area of a rectangle in square feet?
- Measure both sides in feet and multiply them. A 10 ft by 12 ft rectangle has an area of 120 square feet. One square metre is about 10.76 square feet.
- What is the area of a rectangle in square meters?
- Measure both sides in metres and multiply. A 4 m by 5 m rectangle has an area of 20 m².
- How do I find the area of a rectangle in cm?
- Multiply the length in cm by the width in cm. An 8 cm by 5 cm rectangle has an area of 40 cm².
All 86 formulas on one page.
A searchable sheet for revision, homework and quick checks.